Get your products ready for the Cyber Resilience Act
Annex I requirements, vulnerabilities, ENISA notifications and the CE marking file in one platform, product by product.
What the Cyber Resilience Act is and what it will ask of you
Regulation (EU) 2024/2847, the Cyber Resilience Act, requires cybersecurity from every product with digital elements sold in the EU: software, connected devices, components. Without it there is no CE marking, and without CE marking the product cannot be placed on the market.
It mainly binds manufacturers, but importers and distributors too. And anyone who sells a product under their own brand becomes the manufacturer for all purposes. Since 11 September 2026, actively exploited vulnerabilities and severe incidents must be reported, including for products already on the market. Everything else applies from 11 December 2027.
For the detail, read our guide on what the Cyber Resilience Act is and the practical part on how to comply with it.
- Regulation
- Regulation (EU) 2024/2847
- In force
- 10 December 2024
- Reporting
- Mandatory since 11 September 2026
- Full application
- 11 December 2027
- Fines
- Up to €15M or 2.5% of worldwide turnover
Role and products
You work out whether you are a manufacturer, importer or distributor and classify each product.
Risk and gaps
You assess each product’s risk and compare it against Annex I.
Vulnerabilities
SBOM, patches and on-time ENISA notifications for the whole support period.
CE marking
Technical documentation, conformity assessment and EU declaration.
How a product is classified
Most products
The manufacturer assesses conformity on its own.
Important
Password managers, VPNs, routers… Harmonised standards or a notified body.
Important
Firewalls, hypervisors, intrusion detection… Always with a third party.
Critical
Smart cards or smart meter gateways. May require European certification.
The CRA in GlobalSuite®
Each product with its classification, requirements, vulnerabilities and file. And each requirement linked to a control, an owner and a piece of evidence.
Notifications on time
When a vulnerability is flagged as exploited the clocks start, and every submission to ENISA and the CSIRT is logged.
Your suppliers included
SBOM components link to the third-party risk module: you know who supplies each part and whether it is still supported.
The file builds itself
Risks, controls and evidence are already in the platform. The technical documentation comes from there, not from a loose folder.
The CRA fits with what you already do
Cyber Resilience Act
Products, Annex I requirements, vulnerabilities, notifications and CE marking.
You are hereNIS2
The directive for organisations. The CRA does the same for the products they sell.
See solution →ISO 27001
If you already have an ISMS, a good share of the CRA controls is done.
See solution →Third-party risk
Your suppliers and the components they sell you, assessed and monitored.
See solution →
Cyber Resilience Act: frequently asked questions
Does it affect me if I don’t manufacture anything?
What is already mandatory?
Is software as a service covered?
How long do I have to provide support?
How does it relate to NIS2?
What is an SBOM?
The Cyber Resilience Act is Regulation (EU) 2024/2847 of the European Parliament and of the Council, published in the Official Journal of the European Union.
Your products ready
for the CRA.
We’ll show you Annex I, vulnerabilities and notifications in GlobalSuite®.


